Quadrupolový hmotnostní spektrometr BELMASS II Technické údaje
| Maximum range | m/z = 1 ～ 200 |
|---|---|
| Filament material | Yttria-coated iridium |
| Detector | Faraday cup / SEM |
| Resolution | M / -delta-M >= 2M |
| Sniffing section | Capillary tubes//Standard-specification is made of SUS//Option-specification is made of PEEK |
| Capillary tube dimensions | OD = 1/16 inch; ID = 0.1 mm; L = 1.5 m |
| Hot hose length | 1 m |
| Maximum heating temperature of hot hose | 200°C (SUS)//120°C (PEEK) |
| Gas introduction method | Differential exhaust |
| Amount of gas introduced | 0.6 cc / min (at 1 atm) |
| Gas inlet pressure | Atmospheric pressure |
| Exhaust port fitting | 1/4 inch one-touch joint |
| Communication Interface | RS-232C (straight) |
| Dimensions (W x H x D) | 280 × 400 × 600 mm (excluding capillary tube) |
| Analog signal input | DC0 to 10V (10 bit, 1 ch) |
| Weight | 36 kg |
| Power supply: Rated voltage | Single-phase: 100-120V (Indication 115V)//AC: 200-240V (Indication 230V) |
| Power supply: Power frequency | 50 / 60 Hz |
| Power supply: Power consumption | 600 VA |
| Power supply: Electric shock protection class | Class I |
| Standard | CE, UKCA |
| Selected Ion Monitor | Max. 16 ch |
| Installation environment: Temperature | 10°C to 35°C |
| Installation environment: Humidity | 20%RH to 80%RH (no condensation) |
| Installation environment: Elevation | 2000 m or less |
| Installation environment: Installation category | Category II |
| Installation environment: Pollution degree | 2 (for indoor use) |